Useful Latest Leads4pass IT Exam Dumps Questions And Answers Update

Latest Microsoft, Cisco, CompTIA And Other Lead4pass Exam Dumps Training Materials And Study Guides Update Free Try

[Useful Dumps] Useful Latest Cisco ICND1 100-105 Dumps Exam Questions And Youtube Free Shared (Q1-Q15)

[Useful Dumps] Useful Latest Cisco ICND1 100-105 Dumps Exam Questions And Youtube Free Shared (Q1-Q15)

Are you ready for your Cisco 100-105 exam test? Prepare for Cisco 100-105 exam with useful latest Cisco ICND1 100-105 dumps exam questions and answers in PDF format free download from lead4pass. “Cisco Interconnecting Cisco Networking Devices Part 1 (ICND1 v3.0)” is the name of Cisco ICND1 exam dumps which covers all the knowledge points of the real Cisco exam. The best Cisco ICND1 100-105 dumps pdf files and vce youtube demo update free shared. Latest Cisco ICND1 100-105 dumps pdf training materials update free try, pass Cisco 100-105 exam test easily.

Latest Cisco 100-105 dumps pdf questions and answers:

Latest Cisco 200-105 dumps pdf questions and answers:
100-105 dumps
Which address type does a switch use to make selective forwarding decisions?
A. Source IP address
B. Destination IP address
C. Source and destination IP address
D. Source MAC address
E. Destination MAC address
Correct Answer: E

Switches analyze the destination MAC to make its forwarding decision since it is a layer 2 device. Routers use the destination IP address to make forwarding decisions.

Which two VLANs are reserved for system use only? (Choose two)
A. 1
B. 4095
C. 4096
D. 0
E. 1001
Correct Answer: BD

The VLANs 0 and 4095 are reserved by the IEEE 802.1Q standard and you cannot create, delete, or modify them so they are the correct answers.

SW-C has just been added to the network shown in the graphic 100-105 dumps
100-105 dumps
What is the purpose of assigning a default gateway to this switch?
A. allows connectivity to Router B from the switch prompt
B. allows console port connectivity to the switch from Host A
C. allows connectivity to remote network devices from Host B
D. allows the switch to pass traffic between Host A and Host B
Correct Answer: A

100-105 dumps
100-105 dumps
100-105 dumps
What is the bandwidth on the WAN interface of Router 1?
A. 16 Kbit/sec
B. 32 Kbit/sec
C. 64 Kbit/sec
D. 128 Kbit/sec
E. 512 Kbit/sec
F. 1544 Kbit/sec
Correct Answer: A

Use the andquot;show interface s0/0andquot; to see the bandwidth set at 16 Kbit/sec. The show interface s0/0 command results will look something like this and the bandwidth will be represented by this.

Which of the following describe the process identifier that is used to run OSPF on a router? (Choose two)
A. It is locally significant.
B. It is globally significant.
C. It is needed to identify a unique instance of an OSPF database.
D. It is an optional parameter required only if multiple OSPF processes are running on the router.
E. All routers in the same OSPF area must have the same process ID if they are to exchange routing information.
Correct Answer: AC

They are locally significant only, and have no bearing on the structure of any OSPF packet or LSA update.

Which statements are true regarding ICMP packets? (Choose two.)
A. They acknowledge receipt of TCP segments.
B. They guarantee datagram delivery.
C. TRACERT uses ICMP packets.
D. They are encapsulated within IP datagrams.
E. They are encapsulated within UDP datagrams.
Correct Answer: CD

Ping may be used to find out whether the local machines are connected to the network or whether a remote site is reachable. This tool is a common network tool for determining the network connectivi 100-105 dumps

Refer to the exhibit.
100-105 dumps
Which two statements are true about the loopback address that is configured on RouterB? (Choose two.)
A. It ensures that data will be forwarded by RouterB.
B. It provides stability for the OSPF process on RouterB.
C. It specifies that the router ID for RouterB should be
D. It decreases the metric for routes that are advertised from RouterB.
E. It indicates that RouterB should be elected the DR for the LAN.
Correct Answer: BC

A loopback interface never comes down even if the link is broken so it provides stability for the OSPF process (for example we use that loopback interface as the router-id) – The router-ID is chose

You are a junior network engineer for a financial company, and the main office network is experiencing network issues. Troubleshoot the network issues.
Router R1 connects the main office to the internet, and routers R2 and R3 are internal routers.
NAT is enabled on router R1.
The routing protocol that is enabled between routers R1, R2 and R3 is RIPv2.
R1 sends the default route into RIPv2 for the internal routers to forward internet traffic to R1.
You have console access on R1, R2 and R3 devices. Use only show commands to troubleshoot the issues.
100-105 dumps
100-105 dumps
100-105 dumps
Users complain that they are unable to reach internet sites. You are troubleshooting internet connectivity problem at main office. Which statement correctly identifies the problem on Router R1?
A. Interesting traffic for NAT ACL is incorrectly configured.
B. NAT configurations on the interfaces are incorrectly configured
C. NAT translation statement incorrectly configured.
D. Only static NAT translation configured for the server, missing Dynamic NAT or Dynamic NAT overloading for internal networks.
Correct Answer: B

Refer to the exhibit.
100-105 dumps
The MAC address table is shown in its entirety. The Ethernet frame that is shown arrives at the switch.
What two operations will the switch perform when it receives this frame? (Choose two.)
A. The switch will not forward a frame with this destination MAC address.
B. The MAC address of 0000.00aa.aaaa will be added to the MAC Address Table.
C. The MAC address of ffff.ffff.ffff will be added to the MAC address table.
D. The frame will be forwarded out of all the active switch ports except for port fa0/0.
E. The frame will be forwarded out of fa0/0 and fa0/1 only.
F. The frame will be forwarded out of all the ports on the switch.
Correct Answer: BD

If the switch already has the MAC address in its table for the destination, it will forward the frame directly to the
destination port.

Refer to the exhibit.
100-105 dumps
The network is converged.After link-state advertisements are received from Router_A, what information will Router_E contain in its routing table for the subnets and
A.[110/13] via, 00:00:07, FastEthemet0/0[110/13] via, 00:00:16, FastEthemet0/0
B.[110/1] via, 00:00:07, Serial1/0[110/3] via, 00:00:16, FastEthemet0/0
C.[110/13] via, 00:00:07, Serial1/0[110/13] via, 00:00:16, Serial1/0[110/13] via, 00:00:16, FastEthemet0/0
D.[110/3] via, 00:00:07, Serial1/0[110/3] via, 00:00:16, Serial1/0
Correct Answer: A

Router_E learns two subnets subnets and via Router_A through FastEthernet interface. The interface cost is calculated with the formula 108 / Bandwidth.

Why would a network administrator configure port security on a switch?
A. to prevent unauthorized Telnet access to a switch port
B. to prevent unauthorized hosts from accessing the LAN
C. to limit the number of Layer 2 broadcasts on a particular switch port
D. block unauthorized access to the switch management interfaces
Correct Answer: B

Which statements are TRUE regarding Internet Protocol version 6 (IPv6) addresses? 100-105 dumps (Choose three.)
A. An IPv6 address is divided into eight 16-bit groups.
B. A double colon (::) can only be used once in a single IPv6 address.
C. IPv6 addresses are 196 bits in length.
D. Leading zeros cannot be omitted in an IPv6 address.
E. Groups with a value of 0 can be represented with a single 0 in IPv6 address.
Correct Answer: ABE

Which two of these statements are true of IPv6 address representation? (Choose two.)
A. There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast.
B. A single interface may be assigned multiple IPv6 addresses of any type.
C. Every IPv6 interface contains at least one loopback address.
D. The first 64 bits represent the dynamically created interface ID.
E. Leading zeros in an IPv6 16 bit hexadecimal field are mandatory.
Correct Answer: BC

The command ip route was issued on a router. No routing protocols or other static routes are configured on the router. Which statement is true about this command?
A. The interface with IP address is on this router.
B. The command sets a gateway of last resort for the router.
C. Packets that are destined for host will be sent to
D. The command creates a static route for all IP traffic with the source address
Correct Answer: C

Some routers have been configured with default routes. What are some of the advantages of using default routes? (Choose two)
A. They establish routes that will never go down.
B. They keep routing tables small.
C. They require a great deal of CPU power.
D. They allow connectivity to remote networks that are not in the routing table
E. They direct traffic from the internet into corporate networks.
Correct Answer: BD

Newest helpful Cisco ICND1 100-105 dumps pdf practice files and study guides free download from lead4pass. The best and most update high quality Cisco ICND1 dumps pdf training resources which are the best for clearing 100-105 exam test, and to get certified by Cisco ICND1, download one of the many PDF readers that are available for free.

Best Cisco ICND1 100-105 dumps vce youtube: